·
On a solid
and even terrazzo surface, install the first plywood board subfloor
along the intended flooring direction, where the rubber cushion pads
must have previously been fastened, spaced 30 cm apart. [Note: in
BIOSURO II, conic rubber cushion pads]
·
Then,
install the second plywood board subfloor on the former, to form an
angle of 45º. This second subfloor is fastened to the first by
staples.
·
Leave 5mm
space between the boards.
·
Installing
the cork plates begins from the center of the surface, securing the
panels using adhesive.
·
Lastly,
apply sealer coat; sand it finely, apply game lines paint and two
finish coats.
Construction way :
